Rockwell Automation 1769-HSC Compact High Speed Counter Module User Manual
Page 108
Advertising
108
Rockwell Automation Publication 1769-UM006E-EN-P - July 2013
Chapter 4
Module Configuration, Output, and Input Data
C
n
PW - Counter Preset Warning (Ctr[0]
.
PresetWarning to
Ctr[3]
.
PresetWarning)
This bit is set when Ctr[
n].CurrentCount has been forced by the module to the
Ctr
nPreset value. This will happen when a configuration array is accepted, which
sets the following:
• Ctr
nMinCount > Ctr[n].CurrentCount
or
• Ctr
nMaxCount < Ctr[n].CurrentCount.
This bit is reset by a 0 to 1 transition of the Ctr
nResetCtrPresetWarning bit in the
output array.
TIP
You must manually reset CnPW, COvf, CUdf and REZ (but not IDW, RV or
IC) to enable them to be set again.
Advertising