Rockwell Automation 2707-L40X_L8X_V40X DTAM Plus Operator Interface Module Installation Instructions User Manual
Dtam plus operator interface module
Advertising
Table of contents
Document Outline
- 2707-UM001C-EN-P, DTAM Plus Operator Interface Module User Manual
- Important User Information
- Table of Contents
- Preface
- 1 - DTAM Plus Overview
- 2 - Loading an Application
- 3 - Using the Function Menu
- Objectives
- Function Key Menu
- Resetting the DTAM Plus
- Setting Communication Port Parameters
- Displaying Remote I/O Port Parameters
- Setting Printer Port Parameters
- Enabling Screen Prints
- Setting the Clock/Calendar
- Adjusting the Display Contrast
- Adjusting the Display Brightness
- Enabling Simulate Mode
- Enabling Terminal Mode
- Entering a New Master Security Code
- Using Scaling
- Accessing the Point/Access Display Function
- Accessing Test Functions
- 4 - Running Applications
- 5 - Installation
- 6 - Communication Connectons and Setup
- Chapter Objectives
- Wiring Guidelines
- Connecting RS-232 Devices
- Connecting RS-485 Devices
- Connection Remote I/O Devices
- Communicating with a Logic Controller
- RS-232 or RS-422 Communications with a PLC-5
- RS-232 Communications iwth an SLC
- DH-485 Communications with an SLC 500 or Network
- RS-232 Communications with a MicroLogix 1000
- RS-485 Communications with a MicroLogix 1000
- 7 - Troubleshooting and Maintenance
- Chapter Objectives
- Troubleshooting Recommendations
- Common Operating Problems
- Error Messages
- Communicaton Error Codes
- Using the Test Functions
- DIP Switch Test
- Display Test
- Keyboard Test
- Comm Port Test
- Printer Port Test
- Display Control Test
- RAM Test
- System Memory Test
- Program File Test
- Clock/Calendar Test
- TXEN Test
- Cleaning the Display Window
- A - Specifications
- B - DTAM Plus Cable Diagrams
- C - Special Controller Functions
- Accessing Special Functions
- Using the P-A/D Function
- Reading Controller Input and Output Files
- Reading / Writing Controller Status Files
- Reading / Writing Controller Bit and Integer Files
- Reading / Writing Controller Timer Files
- Reading / Writing Controller Counter Files
- Reading / Writing Controller Control Files
- Reading / Writing Floating Point Values
- Reading / Writing Controller ASCII Files
- Reading / Writing Controller BCD Files
- Reading / Writing Controller Block Transfer Files
- Reading / Writing Controller Message Files
- Reading / Writing PID Files
- Reading / Writing SFC Files
- Reading / Writing Controll ASCII String Files
- D - Terminal Mode
- E - DTAM Plus Mounting Template
- Index
- Back Cover