Rockwell Automation 2707-L40X_L8X_V40X DTAM Plus Operator Interface Module Installation Instructions - Manual (Page 41)

Loading an Application
Chapter 2
2–15
8. Highlight Upload File from DTAM Plus and press [Return].
The Communication Port Selection screen appears.
. You will not see this screen if a
communication port was
specified during DPS
installation.
9. Highlight the serial port on your computer that is connected to the
DTAM Plus (COMM 1 or COMM 2) and press [Return].
10. The upload begins and the following screen shows the progress of the
upload operation.
11. You are prompted for the application file name. Enter the file name and
press [Return].