Rockwell Automation 2707-L40X_L8X_V40X DTAM Plus Operator Interface Module Installation Instructions - Manual (Page 10)

Preface
P–2
No special knowledge is required to operate the DTAM Plus. If you are
installing the DTAM Plus, you must be familiar with standard panel cutout
and installation techniques. If wiring the DTAM Plus, you must be familiar
with electrical codes in your area (see inside front cover).
You should be familiar with the DTAM Programming Software. See related
publications.
The DTAM Plus shipping box contains:
DTAM Plus User Manual
(Catalog No. 2707-UM001B–EN–P)
Mounting Nuts (8)
(2 Spare)
DIP Switch Cover
European Type GMD
Fuses and Holders
This manual uses the following conventions:
•
Keys that you press on the DTAM Plus are enclosed in brackets [ ].
For example: [NEXT] refers to the NEXT key on the DTAM Plus.
•
References to menus are initial cap followed by the word Menu.
For example: Special Menu, Main Menu, Other Menu
•
All DTAM Plus displays are shown inside a rectangular box.
1 C-Port 5 Special
2 P-Port 6 Term
3 Clk/Cal 7 Test
4 Reset 8 Other
Conventions
Intended Audience
Package Contents