Rockwell Automation 2707-L40X_L8X_V40X DTAM Plus Operator Interface Module Installation Instructions - Manual (Page 51)

Chapter 3
Using the Function Menu
3–9
The Prn Scrn option allows you to send the current display screen to the
printer port when the [EXP] key is pressed on the keypad.
When the Prn Scrn option is disabled, you can only use the [EXP] key to
enter floating point data.
This menu options is only valid for versions that have a printer port.
To enable printing of screens:
1. Select Other [5] from the Function menu.
1 C-Port 5 Special
2 P-Port 6 Term
3 Clk/Cal 7 Test
4 Reset 8 Other
This menu displays:
1 Simulate 5 Mastr C
2 BL / Int 6 Scale E
3 Contrast 7 Exit
4 Prn Scrn
2. Press [4] to select Prn Scrn.
The following screen appears.
PSCREEN Enab ON (1)
”1” or ”Y” = ON
”0” or ”N” = OFF
ENTER = NC
3. Press [1] to enable the screen prints or [0] to disable.
4. Press [7] to exit and return to the Function Menu.
Enabling Screen Prints