Rockwell Automation 2707-L40X_L8X_V40X DTAM Plus Operator Interface Module Installation Instructions - Manual (Page 68)

Chapter 4
Running Applications
4–6
Recipe screens allow the DTAM Plus to write to multiple controller
addresses in one operation. Recipe screens can also be linked so that more
than one recipe is downloaded.
T4:14.2 (Timer Value)
N7:30 = 0 (Integer Value)
N7:31 = 100 (Integer Value)
T4:15.1 (Timer Value)
N7:200 = 500 (Integer Value)
B3:10 = 10 (Binary Value)
Operator Initiates
Recipe Download
DTAM Plus Downloads
Data to Multiple Controller Addresses
Controller Modifies Process
Using New Recipe Data
Download Recipe 323?
Press ENTER to send
Depending on how the application was designed, recipe screens will either
automatically download data or display a prompt allowing the download to
be initiated when [Y] is pressed.
PRESS ’Y’ TO SEND
Once the download is initiated, the DTAM Plus writes the recipe data to the
various controller addresses. You cannot modify the recipe data that is sent,
recipe data is specified by the application designer.
Alarm screens indicate conditions that are not expected during normal
operation. Alarm screens are triggered when the controller writes the alarm
screen number to the Advisor register or when triggered by the background
monitor. Refer to page 4–2 for additional information on the Advisor
option.
You must respond to an alarm screen before any other screens can be
displayed. The [F] key (accessing function menu) will not operate while an
alarm screen is displayed. Press [Y] to acknowledge the alarm.
PRESS ’Y’ TO CLEAR
Recipe Screens
Alarm Screens