Rockwell Automation 2707-L40X_L8X_V40X DTAM Plus Operator Interface Module Installation Instructions - Manual (Page 81)

Chapter 6
Communication Connections and Setup
6–5
The Remote I/O port of the DTAM Plus provides access via a Remote I/O
link directly to a controller or subscanner. Use cable (Catalog No. 1770-CD)
Belden 9463 for all Remote I/O connections. Refer to Publication No.
1770-4.1 for detailed grounding and wiring guidelines. The user manual for
your controller or subscanner will also provide cabling instructions.
The following figures show typical Remote I/O connections.
PLC-5
RediPANEL
Remote I/O Network
PanelView
Remote I/O DL40 Plus
Computer
Cabling (Catalog No.
1770-CD) Belden 9463
DTAM Plus
Operator Interface
SLC 5/03, 5/04, 5/05
DTAM Plus
Remote I/O Port
Cabling (Catalog No. 1770-CD)
Belden 9463
RIO Scanner
(Catalog No. 1747-SN)
DTAM Plus to an Remote I/O Link
DTAM Plus
Operator Interface
DTAM Plus to an SLC 5/03, 5/04, 5/05 Remote I/O Scanner
Connecting Remote I/O
Devices