Rockwell Automation 2707-L40X_L8X_V40X DTAM Plus Operator Interface Module Installation Instructions - Manual (Page 48)

Chapter 3
Using the Function Menu
3–6
Last Rack
Selecting LastRack [3] shows whether the DTAM Plus is configured as the
last rack.
Is Last Rack YES
”ENTER” To Continue
Rack Number
Selecting RackNum [4] displays the current rack number of the DTAM Plus.
Rack Number 02
”ENTER” To Continue
Module Group
Selecting ModuGrp [5] displays the starting module group of the
DTAM Plus.
Module Group 0
”ENTER” To Continue
Reset
Selecting Reset [6] restarts the DTAM Plus (same as cycling power).