Rockwell Automation 2707-L40X_L8X_V40X DTAM Plus Operator Interface Module Installation Instructions - Manual (Page 146)

5.625 in
5.876 in
.188 in dia
6 places
0.078 in
0.125 in
DTAM Plus
Panel Cut-Out
Template
5.625 Inch x 7.725 Inch
142.87 mm x 196.21 mm
7.725 in
3.938 inch = 100.03 mm
7.725 inch = 196.21 mm
5.625 inch = 142.87 mm
5.876 inch = 149.25 mm
.188 inch
= 4.78 mm
0.125 inch = 3.18 mm
0.078 inch = 1.98 mm
3.938 in
3.938 in
➀
Drill holes before making the cut-out.
➁
We recommend that a minimum of 2.5” clearance be allowed for operator interface depth.
Note: Maximum panel thickness is 1/4” (.250)