Rockwell Automation 2707-L40X_L8X_V40X DTAM Plus Operator Interface Module Installation Instructions - Manual (Page 13)

A–B
1
Chapter
1–1
DTAM Plus Overview
This chapter describes the DTAM Plus and accessories.
Section Page
General Information 1–1
Description 1–2
Keypad 1–4
DIP Switches 1–5
Communication Ports 1–6
RS-232 Communications 1–8
RS-485 Communications 1–9
Remote I/O Communications 1–10
Default Settings 1–11
DTAM Plus Programming Software (DPS) 1–12
Product Options and Accessories 1–13
The DTAM Plus interfaces with the Allen-Bradley PLC and SLC controller
product lines. The DTAM Plus allows operators to monitor and manipulate
process data on the plant floor.
RS-485 (DH-485), RS-232 / RS-422 (DF1) or Remote I/O Options.
Connect the DTAM Plus to the SLC family of processors via DH485, in
network or point-to-point modes or Remote I/O through a 1747-SN scanner.
Connect to the PLC family using Remote I/O or RS-232 / RS-422 DF1
through Channel 0 of PLC-5 processors.
8K or 40K Memory Capability. Supports up to 50 or 244 screens of data.
Recipe Operations. Recipe type functions allow operators to quickly
modify blocks of data. Download data to a maximum of 10 non-sequential
register addresses per screen. Link multiple recipe screens to download data
to more than 10 addresses.
Real Time Clock. 40K versions allow time stamping of critical reports and
displayed data.
Point-Access/Display Function. Allows you to monitor or modify data files
in SLC or PLC controllers. Use this function to setup and debug application
programs.
ASCII Input Capability. 40K versions allow the input of ASCII data, such
as decoded bar code data, through the RS-232 printer port.
PLC or SLC Controlled Screen Changes. Controllers can both monitor
and change the displayed screen.
Objectives
General Information