Rockwell Automation 5370 Color CVIM Communications Manual - Manual (Page 118)

Chapter 5
Using the RS–232 Ports
5–50
Use the Save command to save Color CVIM module configuration data to
the local storage area (EEPROM) or the external RAM card (credit card
memory).
Note: Depending upon the card size, up to 16 configurations can be saved to
the RAM card (512K card).
Use the following commands:
Saves configuration to EEPROM.
XX
Where XX = card storage location (01 to 16).
This function can only be executed once per command. You cannot use the
commands when the Color CVIM module is in the SETUP mode.
If the BCC is not valid, the Color CVIM module will respond with a DLE
NAK and the command will not be executed.
If the BCC is valid, the Color CVIM module will respond with a DLE ACK.
Then the Color CVIM module will validate the command structure. If the
command is valid, the Color CVIM module will execute the command. If the
command structure is invalid, the Color CVIM module will not execute the
command or respond.
Save Command