Rockwell Automation 5370 Color CVIM Communications Manual - Manual (Page 201)

Appendix D
Configuration Data
D–2
Table D.1 shows the function of each word in the system environment
configuration block.
Table D.1
Configuration Block #1– System Environment
Remote I/O
& RS–232
Word #*
Bit # Definition Usage Notes
0 0–15 Block Transfer Signature
1–3 0–15 Reserved
4 0–7 Configuration ID (Char. 2)
4 8–15 Configuration ID (Char.1)
5 0–7 Configuration ID (Char. 4)
5 8–15 Configuration ID (Char. 3)
6 0–7 Configuration ID (Char. 6)
6 8–15 Configuration ID (Char. 5)
7 0–7 Configuration ID (Char. 8)
7 8–15 Configuration ID (Char. 7)
8 0–7 Configuration ID (Char. 10)
8 8–15 Configuration ID (Char. 9)
9 0–7 Configuration ID (Char. 12)
9 8–15 Configuration ID (Char.11)
10 0–7 Configuration ID (Char. 14)
10 8–15 Configuration ID (Char.13)
11 0–7 Configuration ID (Char. 16)
11 8–15 Configuration ID (Char.15)
12 0–15 Reserved
13 0 Reserved
13 1 Remote I/O Enable
0 = Disabled
1 = Enabled
13 2 & 4 Protocol–Port A
0 = ASCII
1 = DF1
2 = Not Specified
3 = Not Specified
Port A, see bits 5 & 6 for port B.
13 3 Host Standby Mode
0 = Standby Enabled
1 = Standby Disabled
* Refer to Chapter 6 for Pyramid Integrator long word descriptions.
Configuration Block #1