Rockwell Automation 5370 Color CVIM Communications Manual User Manual
Page 150
Chapter 6
Using the Pyramid Integrator Backplane
6–13
CONTROL BLOCK OMSG0:0
F1 Module ID:
Class = CVIM Pw# = 1 Port# = 1
F2 Priority:
HIGH
F3 Local/Remote:
LOCAL
F4 Local Link Type:
DH+
F5 Remote Link Type:
N/A
F6 Station ID:
Node# = 0
F7 Communication Command:
TYPED READ
F8 Internal Data Table Addr:
0L9:0
F9 External Data Table Addr:
”>rc,cb 1–213”
F10Requested Size:
0
Parameters:
N/A
CONTROL BLOCK OMSG0:1
F1 Module ID:
Class = CVIM Pw# = 1 Port# = 1
F2 Priority:
HIGH
F3 Local/Remote:
LOCAL
F4 Local Link Type:
DH+
F5 Remote Link Type:
N/A
F6 Station ID:
Node# = 0
F7 Communication Command:
TYPED WRITE
F8 Internal Data Table Addr:
0L9:0
F9 External Data Table Addr:
”>wc,cb1–213”
F10Requested Size(element):
0
Parameters:
N/A
Note: You must create a file using Memory Map to create the file 0L9 and
enable words 0 through 9999 in that file.
If you are accessing results through a MicroVAX information processor, you
should use the standard library functions to access the data. The MicroVAX
library instructions are called up using a simplified “C” type language. For
example:
DTL__READ__W(Address, &Result, &Error);
Refer to the MicroVAX manuals for the available library routines.
Sample PLC–5/250 Program
(cont’d)
Obtaining Inspection Result
Information Using a MicroVAX
Information Processor