Configuration blocks 40–45 – Rockwell Automation 5370 Color CVIM Communications Manual User Manual
Page 208
Appendix D
Configuration Data
D–9
Table D.6
Configuration Blocks #37–39 – Reference Lines 1–3 (cont’d)
Remote I/O
& RS–232
Word #
Bit #
Definition
Usage
Notes
22
0–7
X/Y–Line High Threshold/
Gradient Threshold
0–197
22
8–15
Image Number
0–37
23
0–7
Reserved
23
8–15
X/Y–Line Low Threshold/
Scale Factor
24
0–15
X/Y–Line Head X Position
From upper left corner.
25
0–15
X/Y–Line Head Y Position
From upper left corner.
26
0–15
X/Y–Line Tail X Position
From upper left corner.
27
0–15
X/Y–Line Tail Y Position
From upper left corner.
28–29
0–15
Reserved
Table D.7 shows the function of each word in the reference window 1–3
configuration blocks.
Table D.7
Configuration Blocks #40, 42, and 44 – Reference Windows 1–3
Remote I/O
& RS–232
Word #*
Bit #
Definition
Usage
Notes
0
0–15
Block Transfer Signature
1
0–7
Reserved
0 = Disabled
1
8
Enable
0 = Disabled
1 = Enabled
1
9–15
Reserved
2–8
0– 15
Reserved
* Refer to Chapter 6 for Pyramid Integrator long word descriptions.
Note: There are two Configuration Blocks per Reference Window:
Ref. Window 1 (Part 1)
in block
#40
Ref. Window 1 (Part 2)
in block
#41
Ref. Window 2 (Part 1)
in block
#42
Ref. Window 2 (Part 2)
in block
#43
Ref. Window 3 (Part 1)
in block
#44
Ref. Window 3 (Part 2)
in block
#45
Configuration Blocks 37–39
(cont’d)
Configuration Blocks 40–45