Metrohm 815 Robotic Soliprep User Manual
815 robotic soliprep
Advertising
Table of contents
Document Outline
- Table of contents
- 1 Introduction
- 2 Robotic Titration Soliprep 2.815.1110
- 2.1 Installation
- 2.1.1 Preparing the Sample Processor
- 2.1.2 Installing tiamo™
- 2.1.3 Configuring the Swing Heads
- 2.1.4 Configuring the towers
- 2.1.5 Defining rack positions
- 2.1.6 Mounting the Swing Heads
- 2.1.7 Opening the guide chain
- 2.1.8 Mounting the robotic arm for titration
- 2.1.9 Mounting the Polytron robotic arm
- 2.1.10 Washing station and drip pan
- 2.1.11 Connecting and setting up peristaltic pumps
- 2.1.12 Setting up the rinsing tubing
- 2.1.13 Assembling and mounting the Polytron® drive
- 2.1.14 Mounting the rinsing tubings for the Polytron®
- 2.1.15 Connecting the Polytron®
- 2.1.16 Installing a titrator with titrant and auxiliary solutions
- 2.1.17 Equipping the titration head
- 2.2 Setting lift positions
- 2.1 Installation
- 3 Robotic Flexible Soliprep 2.815.2110
- 3.1 Installation
- 3.1.1 Preparing the Sample Processor
- 3.1.2 Installing tiamo™
- 3.1.3 Configuring the Swing Heads
- 3.1.4 Configuring the towers
- 3.1.5 Defining rack positions
- 3.1.6 Mounting the Swing Heads
- 3.1.7 Opening the guide chain
- 3.1.8 Mounting the deflector and the collection container
- 3.1.9 Mounting the transfer robotic arm
- 3.1.10 Mounting the Polytron robotic arm
- 3.1.11 Washing station and drip pan
- 3.1.12 Connecting and setting up the peristaltic pump
- 3.1.13 Setting up the rinsing tubing
- 3.1.14 Assembling and mounting the Polytron® drive
- 3.1.15 Mounting the rinsing tubings for the Polytron®
- 3.1.16 Connecting the Polytron®
- 3.1.17 Mounting the safety shield
- 3.1.18 Installing the Dosino
- 3.1.19 Equipping the rack
- 3.2 Adjusting rack and robotic arm
- 3.3 Setting lift positions
- 3.1 Installation
- 4 Robotic Filtration Soliprep 2.815.3110
- 4.1 Installation
- 4.1.1 Preparing the Sample Processor
- 4.1.2 Installing tiamo™
- 4.1.3 Configuring the Swing Heads
- 4.1.4 Configuring the towers
- 4.1.5 Defining rack positions
- 4.1.6 Mounting the Swing Heads
- 4.1.7 Opening the guide chain
- 4.1.8 Mounting the deflector and the collection container
- 4.1.9 Mounting the transfer robotic arm
- 4.1.10 Mounting the Polytron robotic arm
- 4.1.11 Washing station and drip pan
- 4.1.12 Connecting and setting up the peristaltic pump
- 4.1.13 Setting up the rinsing tubing
- 4.1.14 Assembling and mounting the Polytron® drive
- 4.1.15 Mounting the rinsing tubings for the Polytron®
- 4.1.16 Connecting the Polytron®
- 4.1.17 Mounting the safety shield
- 4.1.18 Installing the Dosino
- 4.1.19 Equipping the rack
- 4.2 Defining rack positions
- 4.3 Adjusting rack and robotic arm
- 4.4 Setting lift positions
- 4.1 Installation
- 5 Controlling the Polytron®
- 6 Accessories
- Index