Metrohm 815 Robotic Soliprep - Manual (Page 110)

4.1 Installation
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
102 ￭￭￭￭￭￭￭￭
815 Robotic Soliprep
Note
Take care to ensure that you do not twist the drive disc, thus caus-
ing pressure on the drive.
2 Screw the robotic arm to the Swing Head tightly with the screws and
washers provided.
Mounting the transfer tubing
A sufficiently long transfer tubing is required for aspirating or expelling
samples. The 6.1562.130 transfer tubing has a volume capacity of 10 mL
and is placed in a holder on the guide chain of tower 1. Mount it as fol-
lows:
6.1562.130
1 Use a screwdriver to open and remove one of the chain links of the
guide chain (see Chapter 3.1.7, page 52).
2 Hang the holder with the 6.1562.130 transfer tubing in the guide
chain in place of the removed chain link and press it into place.
Mounting the Luer adapter
Filters or injection needles should be able to be picked up with the trans-
fer robotic arm. The 6.1808.220 adapter is used for this purpose. Mount it
as follows: