Metrohm 815 Robotic Soliprep User Manual
Page 24
Advertising
2.1 Installation
■■■■■■■■■■■■■■■■■■■■■■
16
■■■■■■■■
815 Robotic Soliprep
2 In the left-hand window, click on the Tower 1 item under 815_1
(815 Robotic … and then select the Move tab.
3 Moving the lift into position
Click on a green arrow key (left or right) under Rack position.
The sample rack moves to a defined position. Now the lift can be
moved.
4 Under Lift position, click on the green arrow key "down" until the
lift 1 has moved approx. 180 mm downwards.
The two lifts are now in a favorable position permitting easy access
to all of the screws for mounting the Swing Heads.
Advertising