Metrohm 815 Robotic Soliprep - Manual (Page 15)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
2 Robotic Titration Soliprep 2.815.1110
815 Robotic Soliprep
￭￭￭￭￭￭￭￭ 7
2 Robotic Titration Soliprep 2.815.1110
2.1 Installation
It is assumed for the purpose of these installation instructions that the
required adjustment of turntable and Swing Heads has already been per-
formed for the present Robotic Sample Processor.
2.1.1 Preparing the Sample Processor
Plugging in the power supply cable
The power socket is located on the rear side of the instrument.
Connecting the Swing Heads
Note
The necessary settings must first be made in the (tiamo) control soft-
ware before the robotic arms can be mounted on the Swing Heads. For
this purpose, the two Swing Heads are connected but the robotic arms
are not yet mounted.