Metrohm 815 Robotic Soliprep - Manual (Page 45)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
2 Robotic Titration Soliprep 2.815.1110
815 Robotic Soliprep
￭￭￭￭￭￭￭￭ 37
4 Under Robotic arm position, select External 1 and click on the
associated [Assign] button.
5 Switch back to the Move tab.
6 Under Robotic arm position, select External 1 and click on
[Start].
7 Move the lift to the Target position = Work position. Correct the
lift position if necessary.
The Polytron must be positioned at the suitable height for rinsing.
If the Polytron does not fit in the middle of the washing station, the
latter can be shifted laterally.
8 If the position has had to be corrected, switch to the Assign posi-
tion tab.
9 Under Lift position, select the Work position for = External 1.
10 Click on the associated [Assign] button.
11 Switch to the General tab.
12 Click on [Initialize rack].