Metrohm 815 Robotic Soliprep - Manual (Page 96)

4.1 Installation
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
88 ￭￭￭￭￭￭￭￭
815 Robotic Soliprep
The instrument is recognized. The driver installation is carried out dif-
ferently, depending on the version of the Windows operating system
used.
Either the required driver is installed automatically or an installation
wizard is started.
2 Follow the instructions of the installation wizard.
If problems should occur during installation, contact your company's
IT support team.
Instrument registration
Start tiamo.
The USB Sample Processor is recognized automatically by tiamo.
1 Confirm with [Yes].
The properties window for configuring the instrument is displayed.
2 Confirm with [OK].