Metrohm 815 Robotic Soliprep User Manual
Page 129
■■■■■■■■■■■■■■■■■■■■■■
4 Robotic Filtration Soliprep 2.815.3110
815 Robotic Soliprep
■■■■■■■■
121
This applies to the following positions:
Variable name
Position in mm
take needle
180
aspirate sample
170
take filter
167
put filter
127
waste tool
33
To find the method variables, proceed as follows:
1 Click on the Method symbol in the tiamo™ sidebar.
2 Click on Open... in the File menu.
3 Select 815 Robotic Filtration Soliprep - standard method from
the list of available methods and click on [Open].
4 Double-click on the START - Main track symbol.
5 Click on the Method variables tab.
The values of the variables can be changed in this table as necessary.
Opening the manual control
1 Click on the hand symbol in the tiamo™ sidebar.
2 In the left-hand window, click on the Tower 1 item under 815_1
(815 Robotic …) and then select the Move tab.