Metrohm 815 Robotic Soliprep User Manual
Page 58
Advertising
3.1 Installation
■■■■■■■■■■■■■■■■■■■■■■
50
■■■■■■■■
815 Robotic Soliprep
The two lifts are now in a favorable position permitting easy access
to all of the screws for mounting the Swing Heads.
Removing the titration head holders
1
1
2
1 Release both the outside and the inside holder screws on tower 2
(left).
2 Loosen and remove the holder from the holder plate of the guide
chain.
3 Remove the holder from tower 1 as well.
Use the hexagon key provided. The screws will be needed again later.
Advertising