Metrohm 815 Robotic Soliprep User Manual
Page 124
Advertising
4.2 Defining rack positions
■■■■■■■■■■■■■■■■■■■■■■
116
■■■■■■■■
815 Robotic Soliprep
Special beaker on the sample rack 6.2068.020
1 Select the 1st line (Special beaker 1) and click on [Edit].
2 Under Rack position select 103.
3 Close the dialog window with [OK].
4 Assign the rack position 104 to Special beaker 2, as described
above.
5 The last position of the sample rack is conceived as Adjusting posi-
tion. Assign rack position 105 to Special beaker 16.
6 Close the rack data table with [OK].
Advertising