Advanced feature: enter new point code – Leica Geosystems TPS1100 Professional Series - System Field Manual User Manual
Page 101
Advertising
![background image](/manuals/651976/101/background.png)
101
To enter a new point code to the currently selected codelist.
Enter the point code data:
F2
NEW
Meas\ Enter New Point Code
Code
:
12
PtC. Descr :
Tree
Attrib. 1 :
-----
MC
F1
CONT
Point Code
Point Code to be recorded in the measurement
job.
PtC. Descr
Description of the Point Code: optional.
This information will not be recorded.
Attrib. 1
Attribute to be recorded together with the Point
Code in the measurement job.
To accept the point code data and return to the measurement
dialog. The new point code is added to the codelist.
Advanced Feature:
Enter new point code
Advertising