Leica Geosystems TPS1100 Professional Series - System Field Manual - Manual (Page 22)

22
Enter alpha-numerical value
To start the alpha-numerical input for the highlighted value.
The cursor is positioned at the end of the value to be edited.
Use the key to to enter alphanumeric characters.
To position the cursor on the digit to be edited. The digit can be
overwritten now.
You can change between numeric and alphanumeric input
with the key
.
To confirm the entry.
Meas\ Measure & Record
Point Id : 1210
Refl. Ht. : 1.650 m
MC
->INS ->LOW ->NUM
Insert mode ON/OFF Low case/ High case