Leica Geosystems TPS1100 Professional Series - System Field Manual - Manual (Page 28)

28
MAIN\ Main menu
MC
Setup , Measure and Record
Setup
F5
SETUP
The Setup procedure is used to define the job settings and to setup
and orient the instrument on a known station.
To setup the instrument on an unknown station, you can use the
TPS1100 programs Resection or Free Station, explained in the
Applications Program Field Manual.
The job settings can be defined independantly of the setup
procedure, with the function “Job settings” from the FNC-fixed
function key (see chapter FNC-fixed function key).
Start the setup procedure from the main menu.
MAIN\ Job Settings
Meas Job : DEFAULT.GSI
Data Job : DEFAULT.GSI
Codelist : -----
Displ.Mask : Polar
REC-Mask :
STN NEW-J QSET MEAS
MC
To define a new MeasJob.