Leica Geosystems TPS1100 Professional Series - System Field Manual - Manual (Page 97)

97
Point Coding with a codelist In order to enable the point code selection from a codelist, you
must have selected a codelist in a previous step.
Position the cursor bar on the point code field.
Enter the point code to be searched for (e.g. 12). The correponding
point code will be highlighted:
To confirm selection and to return to the measurement dialog.
Meas\ Measurement & Record
Point Id : 112
Point Code : -----
MC
Code search settings:
α α α α αNUM = alpha-numerical search
->NUM = numerical code search
F1
CONT
Meas\ Measurement & Record
Point Code
12 Tree
13 House Corner
14 Pit
15 Electricity Pole
MC
CONT NEW LAST ATRIB α αα ααNUM
<12