Loss of target lock – Leica Geosystems TPS1100 Professional Series - System Field Manual User Manual
Page 60
Advertising
60
Meas\ Measure & Record
Point Id
:
123
Refl. Ht
:
1.700 m
Horiz.Dist :
45.453 m
MC
REC
TEST STOP
To record displayed measurement data, according to the active
REC-mask.
To stop tracking.
F3
REC
F5
STOP
Loss of Target Lock
If the instrument looses lock to the prism, the icon
is
displayed.
A beep signal indicates if the prism has not been found. In this
case, you need to manually aim at the prism: the instrument will
lock to the prism without additional distance measurement.
Advertising