Leica Geosystems TPS1100 Professional Series - System Field Manual - Manual (Page 86)

86
Set the output file parameters:
F1
OK
To accept the settings and return to the File selection dialog.
Default extens. Entry of the output file extension.
! If the output format is GSI, the
extension must be GSI for further use of
the converted file on the instrument.
Coord. Order Selection of the coordinate sequence in the
output file.
Separator Selection of the field separator from the
choicelist (parameter available only for ASCII
output format)
Decimals Selection of the number of decimals for the
coordinate output.