Leica Geosystems TPS1100 Professional Series - System Field Manual - Manual (Page 64)

64 RCS Functions
Introduction RCS stands for Remote Control Surveying. RCS enables all
TPS1100 instruments to be remote controlled. Especially qualified
for this purpose are the instrument types with ATR.
The keyboard of the RCS1100 Controller is the same as the
TPS1100 keyboard. All functions and programs of TPS1100
instruments are available on the RCS1100.
The communication between the instrument and the RCS1100 is
established via radio modems. One radio modem (TCPS26) must
be connected to the TCA’s serial port. As the RCS1100 has an
integrated radio, no additional connections are needed.
RCS mode must be switched on at the instrument first. After all
connections have been made, the RCS1100 can be switched on.
This automatically switches on the instrument. After a few seconds,
the display of the TCA appears on the RCS1100.
For a complete description of the RCS1100 Controller and
the RCS operation functions, please refer to the RCS1100
User Manual.
TCPS26
RCS1100
Controller