Leica Geosystems TPS1100 Professional Series - System Field Manual - Manual (Page 85)

85
Data conversion configuration
Set the source file parameters first:
MAIN\ File selection
MC
Conv\ Configuration
Source file settings
MC
Call the Data conversion configuration from the Data conversion /
File selection dialog.
F2
CONF
Search extens. Entry of the source file extension.
- If the source format is GSI, the extension
must be GSI
- If the source format is ASCII, the
extension is user definable (e.g. TXT,
ASC, etc...).
Only the files with defined extension will be
displayed in the source file choicelist in the File
Selection dialog.
Coord. Order This parameter must correspond to the
coordinate sequence in the source file.
Header lines Number of header lines in the source file. The
header lines are ignored during conversion.