Leica Geosystems TPS1100 Professional Series - System Field Manual - Manual (Page 48)

48
Target Type Selection of the target type; only on instruments
with the option "reflectorless EDM".
= Reflectorless For reflectorless distance measurement.
! The Target type must be set to
"Reflectorless" for distance
measurements to targets without prism or
reflective tape.
= Reflector For distance measurement to the selected
reflector
! The target type must be set to reflector for
normal and long range distance
measurement.
EDM Prog Selection of the EDM measurement program
for the functions DIST and ALL.
= Standard Standard single distance measurement.
= Fast Fast single distance measurement.
= Tracking Continuous distance measurement.
The measured distances can be recorded
anytime with the REC function key.
Parameter description