Leica Geosystems TPS1100 Professional Series - System Field Manual - Manual (Page 21)

21
Edit highlighted value
Alpha-numerical Input
To start the edit mode for the highlighted value.
The cursor is positioned at the end of the value to be edited.
To position the cursor on the digit to be edited. The digit can be
overwritten now.
To confirm the entry.
In alphanumeric mode, one key is used for the input of 3 letters
and one number.
For instance, the key is used to input the letters S, T, U or the
number 1.
Press once to input the letter S.
Press twice in quick succession to input letter T, three times to
enter letter U and four times to enter number 1.
Insert mode
ON/OFF
Meas\ Measurement & Record
Point Id : 121
Refl.Ht : 1.650 0 m
->INS
MC