Leica Geosystems TPS1100 Professional Series - System Field Manual - Manual (Page 40)

40
Check Orientation The Check Orientation dialog allows to check the orientation to a
known backsight point, and to reset the orientation if necessary.
Enter the Backsight Id. If available, the coordinates are
automatically retrieved from the data job.
Aim to backsight point and compare the angles:
Azimut Calculated Azimut between station and backsight.
Hz
Current orientation
∆∆∆∆∆Hz Difference between calculated azimut and current
orientation.
To return to the dialog from which FNC has been started.
FNC\ Function selection
MC
FNC\ Check Orientation
Station Id : STN
Bscks. Id : BS
Refl. Ht. : 1.600 m
Azimuth : 95.6670 g
Hz : 95.6650 g
∆∆∆∆∆Hz : 0.0020 g
CONT DIST POSIT SET VIEW LAST
MC
F1
CONT
Reset the orientation