Leica Geosystems TPS1100 Professional Series - System Field Manual - Manual (Page 58)

58
To activate prism tracking and return to the previous dialog.
The icon indicates that the instrument is locked to the
prism. The rod person can move and the instrument will follow the
prism.
F3
L.GO
2. Step: LOCK to unstable prism This functionality is helpful to lock to a prism located on an
unstable surface, e.g. on a boat, or near to the instrument.
Aim at the prism and make sure that it is visible within the field of
view of the telescope.
To call the function selection dialog.
FNC\ Function selection
1 PPM Definition
2 Reflector Selection
3 EDM program selection
4 Check Orientation
5 Data view and edit
6 Job settings
ATR+ LOCK- L.GO >TRK >FAST
MC