Leica Geosystems TPS1100 Professional Series - System Field Manual - Manual (Page 59)

59
Measure with ATR in Lock Mode
Once the TC(R)A is locked to the prism, you can measure and
record data with the usual measurement functions. The instrument
will follow the prism and position itself to the prism centre everytime
you trigger a distance measurement.
If you want to have a realtime display of the distance betweeen the
TC(R)A and the moving prism, you can start the distance tracking
program, as explained below.
To call the function selection dialog.
Press F5 to switch to the distance tracking mode.
To trigger the distance measurement.
If the EDM Measurement-Program is already set to Tracking or
Rapid Tracking, you must only press F2
F2
DIST
F5
>TRK
Meas\ Measurment & Record
Point Id : 123
Refl. Ht : 1.700 m
Hz : 222.3444 g
V : 82.3467 g
Horiz.Dist : ----- m
Elev.Diff. : ----- m
ALL DIST REC SetHz >DISP
MC