Leica Geosystems TPS1100 Professional Series - System Field Manual - Manual (Page 61)

61
LOCK interrupt
To temporarily interrupt lock mode, call the FNC key from any
dialog.
To interrupt lock and return to the previous dialog.
There are 3 possibilities to re-lock the instrument to the prism:
• Approximatily aim at the prism and measure a distance.
• Approximatily aim at the prism and reactivate lock with the
function from the Function selection dialog.
• Press in the Program selection dialog to position the
instrument to the last recorded point.
Note that you can’t measure distances to side shot points by
interrupting the lock mode. To do so you need to switch the lock
mode off.
F3
L.INT
F3
L.GO
F5
LAST
FNC\ Function selection
1 PPM Definition
2 Reflector Selection
MC
ATR+ LOCK- L.INT >TRK >FAST