Data format formatting a pc-card – Leica Geosystems TPS1100 Professional Series - System Field Manual User Manual
Page 25
Advertising
25
Data Format
Formatting a PC-Card
The measurement data can be recorded in GSI-8 or GSI-16 format
on the PC-Card.
The control data must be available in GSI-8 or GSI-16 format on
the PC-Card.
Control data in ASCII format can be converted to GSI format on the
instrument using the data converter.
The PC-Card can be formatted on the instrument.
To format PC-Card.
When the PC-Card is formatted, all data are irretrievably deleted!
F4
OK
MAIN\
Main menu
MC
MAIN\ Configuration
MC
MAIN\ PC-Card
MC
MAIN\ Format PC-Card
Warning:1151
Formatting deletes all data
on the PC-Card
OK
ABORT
MC
Advertising