Leica Geosystems TPS1100 Professional Series - System Field Manual - Manual (Page 105)

105
The configuration parameters are explained in detail in the
TPS1100 User Manual.
Instrument Config.
01 Units, Decimals, and V-angle
display
02 Reflector selection
- Definition of new
reflectors
DEF1, DEF2, DEF3
03 EDM program selection
- switch reflector to reflectorless
04 Power On, Power Off
Autoexec mode
05 Display and Record
- Define Display Mask DMask
- Define Recording Mask RMask
- PPM entry
06 Point & Meas. Param
- Pt.Id mode
- Increment
- Offset mode
- Quick Code settings
- Info/Attribute entry
- Auto Dist.
Instrument Config. (continued)
07 Date and Time
08 RCS Searching Window
09 Beep/Hz sector
10 Compensator
- Compensator On/Off
- Hz corrections On/Off
11 Hz System and Face
12 Alpha Input mode
- Delay for character input
13 Language