Leica Geosystems TPS1100 Professional Series - System Field Manual - Manual (Page 73)

73
• Edit Point Id and codes.
• Input new coordinates.
The maximal number of jobs is 60.
The Codelist management function allow to
• Select a codelist from the PC-card and internal memory.
• Create a new codelist.
• Add code and Info’s to an existing codelist.
The maximal number of codelist is 32. A codelist can
contain up to 500 codes.
Note that the Meas/Data job or codelist selection can also
be done in the Job settings dialog, which is part of the
Setup procedure.
Data Conversion allows to convert coordinates available in ASCII
format on the PC-Card to GSI format, and vice versa.
Configuration gives access to all TPS1100 configuration
parameters. Refer to chapter “Instrument map” for a description of
the configuration functions.
Instrument calibration allows to check and determine the
instrument errors (Compensator, V-index, Line of sight, Tilting axis
and ATR collimation).
It is explained in detail in the TPS1100 User Manual.