Leica Geosystems TPS1100 Professional Series - System Field Manual - Manual (Page 84)

84
Data conversion Call the "Data conversion" function from the Main menu.
Set the file selection parameters:
MAIN\ Main Menu
MC
MAIN\ File selection
Source path: A:\
MC
To start the file conversion (the function is available only if the file
selection matches with the program configuration).
F1
GO
Source path Selection of the source file path on the PC-
Card
Source file Selection of the file to be converted from the
choicelist.
Format Display of the source file format.
Output path Selection of the path for the output file.
! Select the path "a:\GSI" for GSI-files to
be further used on the instrument.
Output file Filename of the output file. The filename and its
default extension can be modified.
Note that the extension must be part of the
filename.
Format Selection of the output format.
(GSI-8, GSI-16 or ASCII)