User input numeric input – Leica Geosystems TPS1100 Professional Series - System Field Manual User Manual
Page 20
Advertising
20
User Input
Numeric input
User input field are shown in inverse mode on the display.
TPS1100 has three types of input fields:
• Numeric input fields: only numeric values are allowed
(e.g. for the reflector height).
• Alphanumeric input fields: both numeric and
alphanumeric values are allowed (e.g. for point Id).
• Input from a choicelist: only values included in a
predefined list are allowed.
Position the cursor bar on the corresponding input field
(e.g. Refl. Ht.).
Use the keys
to
to enter a new numeric value.
The initial value is deleted after the first keystroke.
You can recover it with
.
To confirm the entry.
Meas\ Measure & Record
Point Id
:
121
Refl. Ht
:
1.650 m
MC
Enter a new value
Advertising