Leica Geosystems TPS1100 Professional Series - System Field Manual - Manual (Page 46)

46
FNC\ Function selection
MC
F1
CONT
Compensator
FNC\ Compensator
Compensator ON/OFF
Hz Corrections ON/OFF
Compensat. : On
Hz-Corr. : On
CONT
MC
Call the Compensator dialog from the function selection dialog.
Select the compensator and Hz corrections settings:
To return to the dialog from which FNC has been started.
Compensat. =
ON V-angles are corrected and relate to the plumb
line.
Compensat. =
OFF V-angles are not corrected and relate to the
standing axes.
Hz-corr. = ON Hz-angles are corrected for Hz/V collimation.
Standing-axis tilt is corrected only if
Compensat.=ON.
Hz-corr. = OFF Hz-angles are not corrected.