Leica Geosystems TPS1100 Professional Series - System Field Manual - Manual (Page 33)

33
Press to manually enter the coordinates for the
highlighted value.
To measure a distance to the backsight and check the difference
∆∆∆∆∆HorizDist between measured and computed distance.
To record the measurements to the backsight point.
(
Instrument not yet orientated !)
To proceed to the next dialog without recording the measurements.
F5
INPUT
F2
DIST
To record station data and backsight point Id. Sets station and
orientation and continues to the Measurement dialog.
To set station and orientation and continue to the Measurement
dialog.
F3
REC
F4
CONT
Or
F3
REC
F4
CONT Or
Set Station with REC or CONT
REC CONT