Leica Geosystems TPS1100 Professional Series - System Field Manual - Manual (Page 54)

54
ON ➜
OFF ➜ no icon
TCA/TCRA instruments can be used in two main operating modes:
• ATR mode: automatic measurements to static prisms.
• LOCK mode: automatic measurements to moving prism. The
instrument follows the moving prism.
ATR operating modes
ATR mode
Call the FNC fixed key from any dialog to switch the ATR on.
To switch ATR on and return to the previous dialog. The ATR
icon is displayed in the status icon column of the display.
To switch ATR off.
F1
ATR+
F1
ATR-
Measure with ATR
ATR is a general function. If switched on, it is active at station
setup, during data collection and within all TPS1100 application
programs.
To start the Automatic Target Recognition process, you need to
trigger a distance measurement with ALL or DIST.
FNC\ Function selection
1 PPM Definition
2 Reflector Selection
3 EDM program selection
4 Check Orientation
5 Data view and edit
6 Job settings
ATR+ LOCK+ >TRK >FAST
MC