Leica Geosystems TPS1100 Professional Series - System Field Manual - Manual (Page 92)

92
Advanced Feature:
Quick Coding Quick Coding is a special function for data collection with coding.
With one keystroke, you can measure and record target points with
code data.
The codes must be available in a codelist, which has been defined
with the Codelist Manager from your Leica SurveyOffice Software.
The codes must be identified with short cuts to work with Quick
Coding. The short cut is a number with one or two digits which is
clearly associated to one code.
Typing the short cut number on the numeric keypad will start the
Quick Coding sequence:
• ALL : to simultaneously measure a distance and record a
measurement block.
• CODE : to select the corresponding code from the
codelist and record a code block.
You can configure the quick coding sequence to your needs:
ALL/CODE to record the measurement data first.
CODE/ALL to record the code data first.