Leica Geosystems TPS1100 Professional Series - System Field Manual - Manual (Page 68)

68
Define a new Working Area
To display the current settings of the Working Area.
F4
WORKA
RCS: Def. Working Area
current
Hz left : 144 g
Hz right : 185 g
V upper : 86 g
V lower : 115 g
CONT DEF CENTR SHOW
MC
F2
DEF
F1
CONT To define a new Working Area by pointing the telescope to the two
opposite corners of a rectangular area.
To position the telescope to the upper left / lower right corner of the
defined Working Area.
To centre the working area to the current telescope position
(retains the same size of the WA).
To confirm the displayed values and return to the previous dialog.
F6
SHOW
QUIT
F3
CENTR