Leica Geosystems TPS1100 Professional Series - System Field Manual - Manual (Page 29)

29
Job Settings Meas. Job Selection of the job for recording
measurements.
Data Job Selection of the job containing the fix point
coordinates.
Disp.Mask Selection of the display mask for the
measurement dialog.
REC-Mask Selection of the GSI recording mask.
The setup procedure offers two different functions for station setup
and orientation:
For station setup and orientation by known azimuth.
For station setup and orientation to a known backsight point.
In both functions the orientation is performed to one point.
You can use the TPS1100 program Orientation and Height Transfer
to set the orientation from measurements to 1 to 10 tie points.
F1
STN
F4
QSET
Station setup functions
2
1
F6
MEAS
Exit after job settings To confirm the job settings and continue to the measurement
dialog.