Leica Geosystems TPS1100 Professional Series - System Field Manual - Manual (Page 30)

30
MAIN\ Job Settings
MC
Station setup and
orientation by given azimuth
Station data Call the Station function from the Job Settings dialog.
MAIN\ Enter Station Data
Station Id : ST1
Inst. Ht. : 1.600 m
Stn. East : 0.000 m
Stn. North : 0.000 m
Stn. Elev. : 0.000 m
Hz : 12.1300 g
CONT REC SetHz IMPOR
MC
To import station coordinates from data job
Enter the Station Id and the instrument height.
You can enter the station coordinates manually or import
them from the data job.
F1
STN
1
This function is used for station setup and instrument orientation,
given the station coordinates and the azimut to a backsight point.