Leica Geosystems TPS1100 Professional Series - System Field Manual - Manual (Page 75)

75
Data job management
MAIN\ Main Menu
MC
F1
CONT
F2
NEW
F3
EDIT
F5
DEL
The Data job is a job containing fixed point coordinates, to be used
within stakeout or any other program. The data job must be on the
PC-Card in the GSI directory.
Call the Data job management from the Main Menu:
Select the Data job.
The Meas. job and the Data job can be the same. In this case,
TPS1100 programs will automatically retrieve the first recorded
coordinates of the specified point Id.
To select the Data job.
To create a new Data job.
To search for point or code data and to view the job content.
To delete the selected Data job.
MAIN\Selection < >
Data Job
DEFAULT.GSI PC-Card
CONT NEW EDIT DEL α αα ααNUM
MC